Putting together your new Bamboo Console Table is quick and easy! Follow the steps below and refer to the videos and images provided for a smooth assembly process. It should take about 10–15 minutes to complete.
Step 1: Check the Parts Inside the Box
Panels:
- A – 1 piece (Main horizontal panel/Top shelf)
- B – 2 pieces (Middle & bottom shelves)
- C – 2 pieces (Table Legs)
- F – 2 pieces (Slats for Middle & Bottom Shelves)
Tools & Hardware:
- D – 4 Long screws
- G – 4 Short screws
- H – 4 Barrel nuts
- E – 1 Allen key (included)
Step 2: Assembly Process
1. Attach the 2 Table Legs (Pieces C) to the Base Panel (Piece A)
- Lay Piece A flat on the floor with the screw holes facing up.
- Use 4 short screws (G) to secure both Pieces C to Piece A.
2. Connect the Slats (Pieces F) to the Table Legs (Pieces C)
- Attach Piece F to Piece C using 1 barrel nut (H) and 1 long screw (D) on each side.
- Repeat this step for both the top and bottom tiers
- The complete frame should look like this.
3. Install Middle & Bottom Shelves (Pieces B)
- Once the frame is secure, flip the table upright.
- Place Pieces B on the top and bottom levels, aligning the wooden plugs with the pre-drilled holes to secure them in place.
- You will now have a complete & installed Bamboo 3-Tier Console Table
That's it - your Bamboo Console Table is now assembled and ready to style!
Want to see the whole process in under a minute? Watch the video below.
If you have any questions or feedback, please contact us at linh@bamboohomebody.com.